● HIGH SPEED ● HIGH HARDNESS ● HIGH EFFICIENCY
● HIGH SPEED ● HIGH HARDNESS ● HIGH EFFICIENCY
Material: tungsten carbide
Grain Size: 0.2um
No of Flutes: 2F
Coating: Superhard Composite Coating
MQO:10pcs
Material: Carbide
Grain Size:0.2μm
No of Flutes: 2F
Coating: Superhard Composite Coating
MQO:10pcs
Material: Carbide
Grain Size: 0.2μm
Diameter(D): 0.2-0.8mm
No of Flutes: 2F
Category: tungsten carbide micro end mill corner radius
Coating: Superhard Composite Coating
Material：Carbide
Grain Size: 0.2μm
Category: Carbide Corner Radius End Mill
No of Flute: 2F
Coating: Superhard Composite Coating
Material: Carbide
Grain Size: 0.2μm
Category: solid carbide end mill
No of Flutes: 4F
MQO:10pcs
Coating: Superhard Composite Coating
Material: Carbide
Grain Size: 0.4μm
Category: Micro End Mills
No of Flutes: 2F
Coating: SiTiNO Composite Coating
Carbide: Micro grain
Grain Size: 0.4μm
No of Flute: 2F
Category: micro ball nose end mill
Coating: SiTiNO Composite Coating
Material: Carbide
No of Flutes: 2F
Category: Corner Radius end mill
Coating: SiTiNO Composite Coating
Mold industry, auto parts, automation equipment
Material: Carbide
Grain Size: 0.4μm
No of Flutes: 2F
Category: Corner Radius
Coating: SiTiNO Composite Coating
Material: Carbide micro end mill
Grain Size: 0.4μm
No of Flutes: 2F
Category: Micro Flat End
Coating: AICrTiN
Material: Carbide
Grain size:0.4μm
No of Flutes: 4F
Shank Dia: 4mm,6mm
Category: Corner Radius
Coating: SiTiNO Composite Coating
Material: Carbide
Grain size: 0.4μm
No of Flutes: 2F
Coating: AICrTiN
Material: Carbide
Grain size: 0.4μm
No of Flutes: 2F
Category: Corner round end mill
Coating: AICrTiN
Materia: Carbide
Grain size : 0.4μm
No of Flutes: 2F
Corner R: Corner Radius
Coating: AICrTiN
Material: Carbide
Grain Size: 0.2μm
No of Flutes: 2F
Category: Miniature End Mill
Coating: DLC
The DLC coated end mills with smaller diameters are used for engraving on the workpiece
Material: Carbide
Grain size: 0.4μm
No of Flutes: 4F
Corner R: Corner Radius
Coating: AICrTiN
Material: Carbide
Grain Size: 0.2um
No of Flutes: 2F
Coating: DLC
Minimize fracturing by high TRS fine(0.2μm) WC grade.
Obtain both tool rigidity & chip evacuation ability
Optimized coating improves wear resistance and improves performance when cutting Even better than Expected. Quality, Trust & Price.
Material: Carbide
Grain Size: 0.2μm
No of Flutes: 2F
Category: Corner Radius End Mill
Coating: DLC
Material: Carbide
Grain size: 0.4μm
No of Flutes: 2F
Category: Corner Radius
Coating: DLC
Carbide: Micro grain
Grain Size: 0.4μm
Corner R: Corner Radius
Flute: 4F
Coating: DLC
