● HIGH SPEED ● HIGH HARDNESS ● HIGH EFFICIENCY
● HIGH SPEED ● HIGH HARDNESS ● HIGH EFFICIENCY
Material: Carbide
Grain Size:0.2μm
No of Flutes: 2F
Coating: Superhard Composite Coating
MQO:10pcs
Material: Micro grain
Coating: Superhard Composite Coating
Flute No:2F/4F
Fine-grain for Complex Geometries
Grain Carbide vs.Standard End Mills: 30% Longer lifespan Proven
Material: Carbide
Grain Size: 0.2μm
No of Flutes: 2F
Diameter Tolerance: 0-0.006
MQO:10pcs
Coating: Superhard Composite Coating
Material:Carbide
Grain Size: 0.2μm
No of Flute: 2F
Shank Dia: 4mm,6mm
Coating: Superhard Composite Coating
Material：Carbide
Grain Size: 0.2μm
Category: Carbide Corner Radius End Mill
No of Flute: 2F
Coating: Superhard Composite Coating
Carbide: Super micro grain
Grain Size: 0.2μm
Flute: 2F
Coating: Superhard Composite Coating
Material: Carbide
Grain Size: 0.2μm
Flute: 2F
Coating: Superhard Composite Coating
Carbide: Micro grain
Grain Size: 0.4μm
No of Flute: 2F
Category: micro ball nose end mill
Coating: SiTiNO Composite Coating
Material: Carbide
Grain Size: 0.4μm
No of Flutes: 2F
Category: Long Neck Flat End Mill
Product :Tungsten Carbide Long Reach Flat End Mills for Steel
Coating: SiTiNO Composite Coating
Material: Carbide
Grain size :0.4μm
No of Flutes: 2F
Coating: SiTiNO Composite Coating
2 Flute Rib Ball End Mills for steel
Material: Carbide
Grain Size: 0.4μm
No of Flutes: 2F
Category: Corner Radius
Coating: SiTiNO Composite Coating
Material: Carbide
Grain size: 0.4μm
No of Flutes: 2F
Coating: AICrTiN
Material:Carbide
Grain size: 0.4μm
No of Flutes: 2F
Category:Long Neck Square End Mill
Coating: AICrTiN
Material: Carbide
Grain size: 0.4μm
No of Flute: 2F
Shank Dia: 4mm,6mm
Coating: AICrTiN
Carbide: Micrograin
Grain Size: Grain size is 0.2μm
Flute: 4F
Coating: SiTiNO Composite Coating
Materia: Carbide
Grain size : 0.4μm
No of Flutes: 2F
Corner R: Corner Radius
Coating: AICrTiN
Material: Carbide
Grain Size: 0.2um
No of Flutes: 2F
Coating: DLC
Minimize fracturing by high TRS fine(0.2μm) WC grade.
Obtain both tool rigidity & chip evacuation ability
Optimized coating improves wear resistance and improves performance when cutting Even better than Expected. Quality, Trust & Price.
Material: Carbide
Grain size: 0.2μm
No of Flutes: 2F
Category: Long Neck Square End Mill
Coating: DLC
Carbide: Micro grain
Grain Size: 0.2μm
Flute: 2F
Coating: SiTiNO Composite Coating
Material: Carbide
Grain Size: 0.4μm
No of Flutes：2F
Coating: DLC
Copper Electrode Milling Series
