● HIGH SPEED ● HIGH HARDNESS ● HIGH EFFICIENCY
● HIGH SPEED ● HIGH HARDNESS ● HIGH EFFICIENCY
Material: Micro grain
Coating: Superhard Composite Coating
Flute No:2F/4F
Fine-grain for Complex Geometries
Grain Carbide vs.Standard End Mills: 30% Longer lifespan Proven
Material: Carbide
Grain Size: 0.2μm
No of Flutes: 2F
Diameter Tolerance: 0-0.006
MQO:10pcs
Coating: Superhard Composite Coating
Material: Carbide
Grain Size: 0.2μm
No of Flutes: 4F
Shank Dia: 4mm,6mm
Categary: Long Neck Square End Mill
Coating: Superhard Composite Coating
Material:Carbide
Grain Size: 0.2μm
No of Flute: 2F
Shank Dia: 4mm,6mm
Coating: Superhard Composite Coating
Material：Carbide
Grain Size: 0.2μm
Category: Carbide Corner Radius End Mill
No of Flute: 2F
Coating: Superhard Composite Coating
Carbide: Super micro grain
Grain Size: 0.2μm
Flute: 2F
Coating: Superhard Composite Coating
Material: Carbide
Grain Size: 0.2μm
Flute: 2F
Coating: Superhard Composite Coating
Material: Carbide
Grain Size: 0.2μm
Category: solid carbide end mill
No of Flutes: 4F
MQO:10pcs
Coating: Superhard Composite Coating
Material:Carbide
Grain size: 0.4μm
No of Flutes: 2F
Category:Long Neck Square End Mill
Coating: AICrTiN
Material: Carbide
Grain Size: 0.4μm
No of Flute: 4F
Shank Dia: 4mm,6mm
Coating: AICrTiN
Helix angle：30°
Grain Size: 0.4um
Application: P20、718H etc soft material.NAK80、H13、S136 etc after quenching.
This Long Neck Small End Mill series of positioning general economical milling cutters. open coarse and fine milling are both applicable.
Material: Carbide
Grain size: 0.4μm
No of Flute: 2F
Shank Dia: 4mm,6mm
Coating: AICrTiN
Materia: Carbide
Grain size : 0.4μm
No of Flutes: 2F
Corner R: Corner Radius
Coating: AICrTiN
Material: Carbide
Grain size: 0.4μm
No of Flutes: 4F
Corner R: Corner Radius
Coating: AICrTiN
Carbide: Ultrafine Grain Tungsten Steel
Diameter: 4-12mm
Coating: Superhard Composite Coating
Radius: R0.2/R0.5/R1
