● HIGH SPEED ● HIGH HARDNESS ● HIGH EFFICIENCY
● HIGH SPEED ● HIGH HARDNESS ● HIGH EFFICIENCY
Helix angle：30°
Grain Size: 0.4um
Application: P20、718H etc soft material.NAK80、H13、S136 etc after quenching.
This Long Neck Small End Mill series of positioning general economical milling cutters. open coarse and fine milling are both applicable.
Carbide: Micrograin
Grain Size: Grain size is 0.2μm
Flute: 4F
Coating: SiTiNO Composite Coating
Material: Carbide
Grain Size: 0.2μm
No of Flutes: 2F
Category: Miniature End Mill
Coating: DLC
The DLC coated end mills with smaller diameters are used for engraving on the workpiece
Material: Carbide
Grain Size: 0.2um
No of Flutes: 2F
Coating: DLC
Minimize fracturing by high TRS fine(0.2μm) WC grade.
Obtain both tool rigidity & chip evacuation ability
Optimized coating improves wear resistance and improves performance when cutting Even better than Expected. Quality, Trust & Price.
Material: Carbide
Grain Size: 0.2μm
No of Flutes: 2F
Category: Corner Radius End Mill
Coating: DLC
Material: Carbide
Grain size: 0.2μm
No of Flutes: 2F
Category: Long Neck Square End Mill
Coating: DLC
Carbide: Micro grain
Grain Size: 0.2μm
Flute: 2F
Coating: SiTiNO Composite Coating
Material: Carbide
Grain Size: 0.4μm
No of Flutes：2F
Coating: DLC
Copper Electrode Milling Series
Carbide: Micro grain
Grain Size: Grain size is 0.2μm
Flute: 2F
Coating: DLC
Application: Aluminum Alloy,Red copper, Oxygen-free copper, Aviation Copper,Military parts,copper electrode etc.
Material: Carbide
Grain size: 0.4μm
No of Flutes: 2F
Category: Corner Radius
Coating: DLC
Material: Carbide
Grain Size: 0.4μm
Flute: 2F
Coating: SiTiNO Composite Coating
Material: Carbide
Grain size: 0.2μm
No of Flutes: 4F
Category: Long Neck Square End Mill
Shank Dia: 4mm,6mm
Coating: DLC
Endmills for copper, copper alloy, nonferrous and nonmetallic materials.
Carbide: Micro grain
Grain Size: 0.4μm
Corner R: Corner Radius
Flute: 4F
Coating: DLC
Material: Carbide
Grain size: 0.4μm
Category: Corner Radius
No of Flutes: 4F
Coating: DLC
Carbide: Ultrafine Grain Tungsten Steel
Diameter: 4-12mm
Coating: Superhard Composite Coating
Radius: R0.2/R0.5/R1
Carbide: Micro grain
Grain Size:0.4μm
Corner R: R0.02, R0.05 ,R0.1
Flute: 2F
Coating: SiTiNO Composite Coating
